Water Conditioner is an additive for arterial embalming fluids. This additive ties up the hardness minerals that are dissolved within your standard tap water. There are always hardness chemicals present unless you using a water softener unit or a reverse osmosis machine to treat your water used for the embalming process. The hardness chemicals will cause clots to form in the residual blood. Water Conditioner may be mixed in any ratio desired with the water used to dilute the arterial embalming fluid concentrate for injection. Even small quantities of this additive can aid the embalming and restoration process. The experienced embalmer is aware that his tap water conditions will typically change seasonally throughout the year. He will assure to  use an adequate quantity of Water Conditioner with his dilution water to prevent clots. No embalming problems will be caused if higher content ratios of Water Conditioner are used in the injection fluid than the absolute minimum needed.

Add 2 - 6 ounces Water Conditioner for each injection fluid gallon when using common tap or well water that has not been adequately softened or processed through a reverse osmosis machine.

(You should experience the ease and convenience using the time-proven Modaflex Co-injection, which is an extremely useful multiple purpose product with drainage, water conditioning, and humectant abilities. Many embalmers have discovered that adding the Modaflex Co-injection typically assures a single-point injection process on a refrigerated case to routinely be successful. See the Additives product section for more detailed description about Modaflex Co-injection and its benefits.)